Opus Bulk Fill APS

Light-curing composite with low-shrinkage stress.

Practicality and agility: filling of cavities of up to 5mm, including the occlusal surface.

Benefits

Longer working time:
Working time under ambient light long enough to perform the restoration at once.

Efficiency and agility:
Single-filling composite

Great curing depth:
Possibility of increments of up to 5mm.

Greater opacity:
The composite has enough translucency to allow a good depth of cure and becomes more esthetic and opaquer after photopolymerization.

High mechanical strength:
Approximately 79% of mass fillers.

Shade predictability:
Minimal change in visual shade before and after photopolymerization.

Recommendations

Direct restorations in posterior teeth (permanent or deciduous) in increments of up to 5 mm, including the occlusal surface.

Basis for direct restorations.

Repair of small enamel defects.

Repair of temporary materials in acrylic and composite.

Commercial Availability

Caps

Package containing 20 caps of 0.2g, available in the shades: A1, A2 and A3.
*Check availability in your country.

Refill

1 syringe with 4g, available in the shades: A1, A2 and A3.

Step by step

Step 1 of 5

Prepare the cavity and keep the tooth free from contaminants, preferably with absolute isolation.

Step 2 of 5

The application of phosphoric acid and dental adhesive must follow the protocol of the respective products used.

Step 3 of 5

Apply Opus Bulk Fill APS into the cavity in 5mm increments. Start applying the composite to the deeper portions of the preparation, always condensing against the walls. Finish with dental sculpture.

Step 4 of 5

Light cure for 40 seconds.