<iframe src="https://tagging.fgmdentalgroup.com/ns.html?id=GTM-KDV4HRF" height="0" width="0" style="display:none;visibility:hidden"></iframe>

Home » Produtos Estética » Ambar

Ambar

Adhesive system for enamel and dentin.

2-step conventional adhesive: primer and bond in the same bottle
Light-curing

Benefits

Higher Adhesive Potential:
The presence of MDP in the composition makes a chemical bond with the dental structure, which adds mechanical adhesion, giving the product a superior adhesive strength.

Higher stability and resistance to adhesive film:
Due to the presence of treated silica nanoparticles.

Quality of the polymerization:
Its chemical characteristics guarantee the quality of the polymerization (even in high moisture environment) and consequent longevity of the adhesive film.

Recommendations

All classes of direct restorations with composites (classes I, II, III, IV and V) and photo-curable ionomeric cements.

Adhesive cementation (together with resinous cement) of prosthetic parts (intracanal posts/ cores, crowns, onlays / inlays and veneers) in fiberglass, ceramics, composite and metal.

Adhesive repairs in ceramics and composites.

Commercial Availability

Single 4ml bottle

• 4ml of primer + adhesive.

Single 6ml bottle

• 6ml of primer + adhesive.

ambar_tradicional_Prancheta-1-300x279[1]

Step by step

Foto-1_1[1]

<img width="354" height="236" src="https://fgmdentalgroup.com/wp-content/uploads/2022/11/Foto-1_11-1.jpg" class="jet-carousel__item-img" alt="Foto-1_1[1]" loading="lazy">

Step 1 of 5

The surface to be restored must be cleaned and then etched with phosphoric acid at 37% Condac 37 (FGM) for 15 seconds (same time for enamel and dentin). It is important to isolate the tooth, whether with complete or relative isolation (depending on the case).

foto-2[3]

<img width="354" height="236" src="https://fgmdentalgroup.com/wp-content/uploads/2022/11/foto-23.jpg" class="jet-carousel__item-img" alt="foto-2[3]" loading="lazy">

Step 2 of 5

Rinse the surface with abundant water and dry the cavity until it is moist, not dehydrated.

foto-3-1[1]

<img width="354" height="236" src="https://fgmdentalgroup.com/wp-content/uploads/2022/11/foto-3-11-1.jpg" class="jet-carousel__item-img" alt="foto-3-1[1]" loading="lazy">

Step 3 of 5

With a micro-applicator Cavibrush (FGM), apply the adhesive rubbing the first drop of the product for 10 seconds. Next, apply a new layer of adhesive to the same surface for other 10 seconds.

foto-4-1[1]

<img width="354" height="236" src="https://fgmdentalgroup.com/wp-content/uploads/2022/11/foto-4-11-1.jpg" class="jet-carousel__item-img" alt="foto-4-1[1]" loading="lazy">

Step 4 of 5

Apply an air jet for 10 seconds, which helps to evaporate the solvent and, consequently to increase adhesion.

foto-5[1]

<img width="354" height="236" src="https://fgmdentalgroup.com/wp-content/uploads/2022/11/foto-51-1.jpg" class="jet-carousel__item-img" alt="foto-5[1]" loading="lazy">

Step 5 of 5

The adhesive must be light-cured for 10 seconds, then perform restoration. Note: for intracanal adhesive application, the photoactivation time must be extended to 20 seconds.

Foto-1_1[1]

<img width="354" height="236" src="https://fgmdentalgroup.com/wp-content/uploads/2022/11/Foto-1_11-1.jpg" class="jet-carousel__item-img" alt="Foto-1_1[1]" loading="lazy">

Step 1 of 5

The surface to be restored must be cleaned and then etched with phosphoric acid at 37% Condac 37 (FGM) for 15 seconds (same time for enamel and dentin). It is important to isolate the tooth, whether with complete or relative isolation (depending on the case).

foto-2[3]

<img width="354" height="236" src="https://fgmdentalgroup.com/wp-content/uploads/2022/11/foto-23.jpg" class="jet-carousel__item-img" alt="foto-2[3]" loading="lazy">

Step 2 of 5

Rinse the surface with abundant water and dry the cavity until it is moist, not dehydrated.

foto-3-1[1]

<img width="354" height="236" src="https://fgmdentalgroup.com/wp-content/uploads/2022/11/foto-3-11-1.jpg" class="jet-carousel__item-img" alt="foto-3-1[1]" loading="lazy">

Step 3 of 5

With a micro-applicator Cavibrush (FGM), apply the adhesive rubbing the first drop of the product for 10 seconds. Next, apply a new layer of adhesive to the same surface for other 10 seconds.

foto-4-1[1]

<img width="354" height="236" src="https://fgmdentalgroup.com/wp-content/uploads/2022/11/foto-4-11-1.jpg" class="jet-carousel__item-img" alt="foto-4-1[1]" loading="lazy">

Step 4 of 5

Apply an air jet for 10 seconds, which helps to evaporate the solvent and, consequently to increase adhesion.

foto-5[1]

<img width="354" height="236" src="https://fgmdentalgroup.com/wp-content/uploads/2022/11/foto-51-1.jpg" class="jet-carousel__item-img" alt="foto-5[1]" loading="lazy">

Step 5 of 5

The adhesive must be light-cured for 10 seconds, then perform restoration. Note: for intracanal adhesive application, the photoactivation time must be extended to 20 seconds.

Scientific evidence

We provide direct links to publications from major scientific portals containing studies conducted with our products.

Links

Other products

Varnish with sodium and calcium fluoride with remineralizing and desensitizing action.

4lj9uwmrr4_duo-300x259[1]

Self-curing composite for making provisional teeth.

y6bdariqk_menor_conjunto[1]

Adhesive system for enamel and dentin

4gge9y8m5w_ambar_tradicional_Prancheta_1-300x279[1]