Home » Produtos Estética » Diamond ACI e ACII

Diamond ACI e ACII

Set of aluminum oxide-based pastes indicated for initial finishing and preliminary polishing of composites and other restorative materials.

Benefits

Two Grits:
Their formulas combine the lubricant properties of Carbowax and high-hardness abrasives, which have a medium grit for the ACI (80 microns) paste and a fine grit for ACII (30 microns).

Thixotropic effect:
Does not run off, facilitating handling.

Soluble in water:
Easy removal.

Recommendations

Finishing and pre-polishing of composites in general, enamel, metals, and amalgam.

Commercial Availability

Packaging containing

• 1 syringe with 4g of Diamond ACI paste
• 1 syringe with 4g of Diamond ACII paste

diamond_excel_refil_perspectiva-226x300[1]

Step by step

Step 1 of 3

Prepare the surface to be polished using medium grit paste (ACI) on a felt disk, leaving it smooth and in the final desired shape. This step must be strictly observed, as generally the brightness will depend on the initial conditions of the surface.

Step 2 of 3

Using AC paste, do the initial polishing of the surface, putting a small quantity of paste over a felt disk or directly on the tooth.

Step 3 of 3

Repeat the procedure for 1 and/or 2 times, until obtaining the desired effect. Next, do the final polishing using the polishing paste Diamond Excel (FGM) or Diamond R (FGM).

Step 1 of 3

Step 2 of 3

Using AC paste, do the initial polishing of the surface, putting a small quantity of paste over a felt disk or directly on the tooth.

Step 3 of 3

Repeat the procedure for 1 and/or 2 times, until obtaining the desired effect. Next, do the final polishing using the polishing paste Diamond Excel (FGM) or Diamond R (FGM).