Whiteness Perfect

Whiteness Perfect

Carbamide peroxide whitening gel at 10%, 16% and 22% for supervised at-home use.

  • Potassium nitrate and sodium fluoride as desensitizing agents.
  • Neutral pH
  • Excellent viscosity

Kit Perfect 2

Seringa Perfect 1 (1)

Benefits

Double desensitizing action: Neural action of potassium nitrate and occlusive sodium fluoride. Potassium nitrate is an effective agent in the treatment of hyperesthetic dentin. Its action is based on the fact that the increased concentration of extracellular potassium depolarizes the membranes of nerve fibers, blocking the passage of the stimulus, reducing hypersensitivity.

Excellent viscosity: Does not run off the tray.

High yield: Each syringe of 3g yields up to 9 applications.

Recomended wearing time:- 10% and 16%: 3 to 4 hours or overnight use.
- 22%: 1 hour.

Recommendations

Whitening of vital teeth using the supervised at-home whitening technique.

Commercial Availability

Individual syringe

1 syringe with 3g of gel, packaged individually.

Individual syringe

1 syringe with 3g of gel, packaged individually.

Mini kit 10% and 16%

3 syringes with 3g of gel each
3 applicator tips

Mini kit 10% and 16%

3 syringes with 3g of gel each
3 applicator tips

Kit 10% and 16%

5 syringes with 3g of gel each
5 applicator tips
2 vinyl plates of 1mm for tray preparation
1 tray case

Kit 10% and 16%

5 syringes with 3g of gel each
5 applicator tips
2 vinyl plates of 1mm for tray preparation
1 tray case

Kit 22%

4 syringes with 3g of gel each
4 applicator tips
2 vinyl plates of 1mm for tray preparation
1 tray case.

Kit 22%

4 syringes with 3g of gel each
4 applicator tips
2 vinyl plates of 1mm for tray preparation
1 tray case.

Step by step

Take the shade so that the dentist and the patient can have a comparison parameter for the whitening. Shade taking can be done using a shade guide or a photograph.Foto 1 2 1 300x200 1

Molding: molding can be made with alginate and must properly copy all teeth that will be whitened.Foto 1 2 1 300x200 1

Mold is made of stone-gypsum, in order to prevent bubbles. It is not necessary to relief the model to create gel shells.Foto 1 2 1 300x200 1

Place the 1mm acetate plate Whiteness Plates for Molds (FGM) into the thermal laminator until forming a slight bending due to the heat. Then, pull the plastic-state plate over the gypsum model, so the suction can thermal format the mold into the model. The plate’s removal must be made after it has fully cooled down.Foto 1 2 1 300x200 1

After removing the mold from the model, trim it to cover 1 to 2mm of the gums margin.Foto 1 2 1 300x200 1

Mold test: the mold should not compress the soft tissue, nor present excessive gaps.Foto 1 2 1 300x200 1

Show to the patient the quantity of gel that should be applied to the tray. One drop of gel must be put into the areas corresponding to the vestibular faces of the teeth that will be whitened. Usage time: 3 to 4 hours per day for concentrations between 10 and 16%, and 1 hour per day for 22% concentration.Foto 1 2 1 300x200 1

The regular consultations of the patient should be scheduled on weekly basis, until completing the treatment. Record the final shade achieved.

Clinical Cases

Sorriso%20final

Whitening with Whiteness HP AutoMixx in two office sessions

Read more